Quantcast
Channel: tonymacx86.com
Viewing all 427618 articles
Browse latest View live

macOS Native CPU/IGPU Power Management

$
0
0
macOS Native CPU/IGPU Power Management

Native macOS power management delivers the best combination of processor and graphics performance and efficiency. The ingredients are an installed processor a XCPM enabling ssdt, a compatible system definition and the native power management kext. Native power management does not require specific BIOS settings or anything more than installing one power management ssdt. Credit, PluginType=1 only technique by RehabMan.

To be...

macOS Native CPU/IGPU Power Management

[HELP!!] IOHDACodecDevice became empty

$
0
0
Hi all,

My laptop is thinkpad x230. I ran my laptop whole day yesterday. But when I woke up this morning, I found that the sound no longer available.

I tried to upgrade my AppleALC (1.2.1 -> 1.2.2) but no lucks. I checked the console and compare the logs from the past,
AppleALC stopped at: "(kernel) AppleALC: alc @ (DBG) missing ControllerModInfo for 2 controller", in normal, there must be something like "(kernel) AppleALC: alc @ (DBG) found supported Realtek ALC269 codec revision...

[HELP!!] IOHDACodecDevice became empty

Launchpad Extremely Slow with Sierra - Help Please

$
0
0
I did a clean install of macOS Sierra today and overall it seems to be running quite well. I've got most everything working, though I haven't tried to install audio drivers yet. I am having one very annoying issue though, when I open Launchpad suddenly screen updates are VERY SLOW.

My system configuration is as follows:

Gigabyte Z97X-UD3H
Intel i5-4690K (using onboard Intel HD 4600 Graphics)
Corsair Vengeance Memory 16GB
Samsung SSD 850EVO 500GB

Clover v2.3k r3763
with the following kexts...

Launchpad Extremely Slow with Sierra - Help Please

Clover doesn't show High Sierra Installer

$
0
0
I'm currently trying to make the update to high sierra from el capitan. I downloaded High Sierra then ran unibeast. Everything installed fine and I can view the USB on my current OS. However, Once I boot up the USB, it loads into clover and shows my current OS but doesn't show the Mac High Sierra Installer at all. Is there anyway I can fix this? I remade the USB 3-4 times already and run into the same problem with clover not showing the installer. It only shows my window and current mac...

Clover doesn't show High Sierra Installer

Sierra 10.12.6 PM kernel panic on boot with custom SSDT

$
0
0
Hey,

I'm wrapping up a Sierra build on my laptop Asus S56. I'm working on the Power Management. I have followed this guide
https://www.tonymacx86.com/threads/guide-native-power-management-for-laptops.175801/ and used ssdtPRGen to generate an SSDT.aml file, which I have placed in the proper folder.

I get a kernel panic upon startup. Here's the text:

Code (Text):

Anonymous UUID:       AE771176-E073-3C17-B34E-72AAE52112A9

Thu Jan 11 11:39:59 2018

*** Panic Report ***
panic(cpu 2...
Sierra 10.12.6 PM kernel panic on boot with custom SSDT

From NVIDIA to AMD fixed my High Sierra UI lag

$
0
0
Wanted to report back since I've read many conflicting threads on this issue.

I had a 1050TI that worked fine (except for glitches here and there) in Sierra. Upgraded to High Sierra and performance was terrible. Lag everywhere in the UI, especially Chrome. Tried all the tweaks, nothing worked.

Read that AMD did not have these issues (yet some people reported still having them), so I tried and switched to RX560.

Before switching cards, I disabled Nvidiaweb in clover and enabled the new...

From NVIDIA to AMD fixed my High Sierra UI lag

[Help] ideapad S400T screen and sleep problem

Clovernot seeing Windows 10 Legacy

$
0
0
Tried many options and I cant get clover to see my windows install.

The closest I got was Boot0SS and using exit which loaded up clover again showing legacy drives but trying to load all resulted in a picture of a person in a circle.

OSX is loading fine and is installed in Legacy mode on my X58A-UD3R-V2
Windows loads if I use the bios F12 to choose that drive.

I have tried PBR and Bios Legacy Mode with no success.

Included is a screenshot of disk util and clover config and my clover...

Clovernot seeing Windows 10 Legacy

GPU fan speed on full blast

$
0
0
I have a Geforce GTX 760 with a Gigabyte GA-Z87X-UD5H Z87 MB and my OS is 10.9.2. My GPU fan is always at full speed for some reason. According to my HWmonitor it says my GPU fanspeed is 1920 rpm....and I'm just browsing the internet. How do I correct this?

SERIOUSLY NEED ASSISTANCE RE INSTALLING SNOW LEOPARD [PLEASE AND THANK YOU IN ADVANCE]

$
0
0
Hi everyone and anyone. Recently had a tragedy in that my Snow Leopard 10.6.8 build of the previous five plus years took a nose dive. In attempting to clone the drive, accidentally ERASED it. I was able to get to my storage and get my Snow Leopard disc from my Macbox set, downloaded iBoot 3.3 burned a CD of it. Got back to Snow Leopard install screen and managed to format the drive yet again to GUID. However, in attempting to re install my software, the monitor cuts off, the computer remains...

SERIOUSLY NEED ASSISTANCE RE INSTALLING SNOW LEOPARD [PLEASE AND THANK YOU IN ADVANCE]

panic when booting from "Boot MacOS X Install" on installation

$
0
0
Hello everybody,

Updating to High Sierra fails on my configuration.

It seems, my config is not too common, and I am not sure what is causing the problem - I might just be missing something.

"Specials" I am using:
i5-5675c with internal graphics
M.2 SSD ADATA Premier SP600
and with that iMac16,2 system definition.

It has always worked great until I tried to install the High Sierra Update.

When staring the update process, the system reboots from the Boot MacOS X Install part of my drive...

panic when booting from "Boot MacOS X Install" on installation

Final Cut crash with Vega 64 & fans always at high speed

$
0
0
Hello, I have the following 100% working build:

Intel i7-7700K
Sapphire AMD Vega 64
16GB DDR4 RAM
Corsair H60i Cooler
macOS High Sierra 10.13.2 (17C88)

Since I use this machine as a professional Final Cut editing station, I also enabled Intel's QuickSync using shikigva=12 boot-arg and Shiki.kext + Lilu.kext.

As I read online, AMD Vega 64 is working out of the box with High Sierra, but there's one major problem: as soon as I create a new project on Final Cut Pro 10.3.4, the whole app...

Final Cut crash with Vega 64 & fans always at high speed

[Guide] USB power property injection for Sierra (and later)

$
0
0
Summary

It appears that Sierra has changed how USB power properties are set. In prior versions, we have injected AAPL,current-available, AAPL,current-extra, AAPL,current-extra-in-sleep, and AAPL,max-port-current-in-sleep directly on the XHC/EHCI ACPI objects. In Sierra, these appear to be replaced by new properties that are injected on the AppleBusPowerControllerUSB object in ioreg.

Note: Just AppleBusPowerController in 10.13.x, further references in this guide to...

[Guide] USB power property injection for Sierra (and later)

Fix no sound after sleep on 1150 (and possibly other realtek's)

$
0
0
Fix no sound after sleep on 1150 - other method (may work for other realtek's aswell)

Preface:
No sound after sleep is a common issue for afaik all realteks. Some people reload the kext using audio reset apps but others feel this is dangerous or a bad solution. A better solution is using codec-commander but it's harder to wrap your head around and some motherboards are even worse to get working. I had one of those and this is a guide to how I solved it.

So how the hell do...

Fix no sound after sleep on 1150 (and possibly other realtek's)

New Build 10.13.2 Black Screen Problem

$
0
0
Hi, I was using Sierra and everything were fine, I upgraded my graphic card from AMD7970 to 1070.
Then errors come to me. I wipe everything and did a clean installation for 10.13.2

I did followed all the steps in
https://www.tonymacx86.com/threads/...er-on-high-sierra-black-screen-panics.234390/

I changed the Csractive config to 0x00 and install the driver. the change back to 0x67
I upgraded the clover to latest version 4369.
but once i enabled the...

New Build 10.13.2 Black Screen Problem

UniBeast: Install macOS High Sierra on Any Supported Intel-based PC

Desktop feels laggy and chrome very slow

$
0
0
I installed High Sierra 10.13.0 last night after being on 10.12.6 for a good few months and it was extremely stable and I had no issues.

After doing a clean install of 10.13.0, I installed the latest nvidia drivers and that's when I noticed that the overall use of the system appears to be very laggy. Even when working on the desktop, simple tasks like resizing windows would show obvious lag on the screen, and chrome is basically unusable (extremely slow and pages lag when scrolling down)...

Desktop feels laggy and chrome very slow

a problem to built quick start after installation

$
0
0
I have completed the installation of OS X on sata SSD, after that I try to built quick start (UEFI Boot Mode) by using Multibeast, however unfortunately, when I reboot the computer, I see 3 HFS option as the picture shows. when I click any one of them, I suffer from a new installation and reboot again and again. Does anybody have the same problem? Is there any suggestion?

Weird 6870

$
0
0
Hi.
I'm trying to get an old ASUS EAH6870 working on my El Cap build but having some trouble with framebuffer or something else?
I've seen alot of post about this but I don't even know if this classifies as "Flicker" or just mad behavior because it's so intense and also seem to shut the screen of at times.

DVI seems to work fine on my 1080p monitor. But DP with 1440p goes off and on with weird blinking and artefacts all over the place. (see video)

I had similar problems with windows 10...

Weird 6870

Boot option appeared again after installing update

$
0
0
The Boot from Install MacOS High Sierra came back. Now I have three boot options. One from my windows, one from macOS, and plus this install macOS high sierra.

It seems this happens when I install an update say from itunes or xcode. This was fixed before when I updated to 10.13.2 from 10.13.1.
Viewing all 427618 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>