January 20, 2021, 7:01 am
↧
January 20, 2021, 7:02 am
Dear Everybody
My Build :
Open core 0.6.3 on OS 10.15.7 Catalina
Main Asrock Z490M ITX/ac
Cpu Intel i5 10400
iGPU UHD 630 (dGPU not Use)
Ram 32Gb,
SSD NVMe Samsung 970 Evo
Wifi MacbookAir 2012 BCM943224pciebt2
Full Working but there is only one small error:
Output the Audio to a monitor 4K screen(Phillip PHL 278E1) via a HDMI port and DisplayPort are both very well. But every reboot, the Audio output (PHL 278E1) is lost on the Speakers section of the Menubar. I must unplug the HDMI cable...
Read more
↧
↧
January 20, 2021, 7:10 am
Hello, guys!
// Comment:
If you need any help, just post your native DSDT along with an existing rehabman patch, if it exists. Otherwise, I'll try to patch it from scratch. If you want me to implement it properly, post your EFI folder aswell.
I will help as many people as possible!
My solution was:
https://www.tonymacx86.com/threads/opencore-battery-patch.295289/post-2101803
I am working on getting my laptop up and running with OpenCore, switching from clover right now...
Read more
↧
January 20, 2021, 7:02 am
Dear Everybody
My Build :
Open core 0.6.3 on OS 10.15.7 Catalina
Main Asrock Z490M ITX/ac
Cpu Intel i5 10400
iGPU UHD 630 (dGPU not Use)
Ram 32Gb,
SSD NVMe Samsung 970 Evo
Wifi MacbookAir 2012 BCM943224pciebt2
Full Working but there is only one small error:
Output the Audio to a monitor 4K screen(Phillip PHL 278E1) via a HDMI port and DisplayPort are both very well. But every reboot, the Audio output (PHL 278E1) is lost on the Speakers section of the Menubar. I must unplug the HDMI cable...
Read more
↧
January 20, 2021, 7:14 am
Stork's Thunderball II Build:
ASUS ProArt Z490 Creator - i5-10400 - AMD RX 580
![]()
![]()
Contents
Components
...
Read more
↧
↧
January 20, 2021, 7:26 am
Update November 2020: Now running 11.0 with this config. Not going to update this post any more.
I recently updated my hardware and also went from Clover to OpenCore in the process - this was not a fresh installation. There are other successful builds on Z490M, but perhaps this is useful to some! I have been running it a few weeks and haven't had any issues.
Attached my complete EFI-folder and the config.plist separately
[ATTACH type="full" width="499px"...
Read more
↧
January 20, 2021, 7:30 am
So, it's in the title.
I'm using the hackintosh described in my profile (Gigabyte H87M-D3H, i5-4440, RX 570). System is up to date on Catalina.
My problem is sometimes, I lost the network connection. I can't ping the router, the computer seems to have lost its IP address (DHCP reserved). I tried to use a manual IP, same problem. I am pretty confident it's not the router, because I changed my FAI recently, and it comes with a new modem-router, but the problem is still there. The only...
Read more
↧
January 20, 2021, 7:32 am
This thread is meant to be support/discussion for X299 motherboards :
it not only means ASUS X299 motherboards but also other brands such as GIGABYTE , ASROCK, EVGA, MSI (...)
The goal is to keep the support for these motherboards alive, publish updates, configurations, hardware, and so on.
It is the continuation of the previous threads.
All the support will be added and linked on my GitHub repo.
So today with macOS Big Sur we're going to start a new forward-looking experience...
Read more
↧
January 20, 2021, 7:32 am
Hi, I just built a dual boot audio production hackintosh with Windows 10 on one nvme and Big Sur on another nvme. When I'm in windows thunderbolt works with my Presonus Quantum 4848 and and my Midas F-32 firewire daisy chained. But in mac the blue light on front just blinks. I also have a flashed titan ridge pcie card from my 2009 5,1 that does the same thing, so its not a flashed issue, I think i need more SSDT's but I can't find anywhere on github or other places to download them. Please...
Read more
↧
↧
January 20, 2021, 7:36 am
First of all I would like to say thank you to all of you who read this posting. I purchased a gaming rig from Digital Storm two years ago and I am interested in knowing if it is possible to have it running as a hackintosh.
here is my system Summary.
Operating System
Windows 10 Pro 64-bit
CPU
AMD Ryzen 7 3700X 40 °C
Matisse 7nm Technology
RAM
32.0GB Dual-Channel Unknown @ 1599MHz (16-18-18-36)...
Read more
↧
January 20, 2021, 7:37 am
I am trying to hackintosh my Dell Optiplex 760 (Specs in profile) and so far i have managed to install Catalina on a second drive without problems. But when I try to boot into the hard drive, nothing happens so I use clover from the usb drive to boot into the installed macOS. The system almost fully boots up, verbose mode switches to an apple logo and a cursor even appears in the corner! But then the system just reboots. On the next boot up in the verbose log it says Prevoius shutdown...
Read more
↧
January 20, 2021, 7:45 am
Gigabyte Z390 M Gaming Build
Components
Gigabyte Z390 M Gaming Motherboard >
Amazon,
Newegg...
Read more
↧
January 20, 2021, 7:57 am
** EFI folder working with opencore 0.6.1 booting 10.15.7 added to attached files **
This is a continuation of a guide from the sierra section updated for mojave.
10.14.5:
- updated kexts
- added ApplePS2SmartTouchPad.kext to "system kexts" to be installed in /L/E for trackpad gesture support.
v2:
- Removed VerbStub
- added SSDT-ALC256.aml and codec commander to address the combo jack.
Mojave v1:
- Updated the kexts, now using whatevergreen, applealc, and VerbStub...
Read more
↧
↧
January 20, 2021, 8:02 am
Hey all,
I've recently reinstalled my new Hack (the i7-10700k build). On my old system I had two physical boot drives (one main and one test bench), each with in individual OSX installation. Each drive had Clover, you could boot from either one an reach the Clover boot screen and boot either drive's OSX installation.
With OpenCore on my new build, I've got my two installations on separate drives. I can set my BIOS to boot from the Test Drive's EFI and it reaches the OpenCore menu fine and...
Read more
↧
January 20, 2021, 8:12 am
Gigabyte z490i ITX / 10900K / Opencore 0.5.9 / Catalina 15.5.5 / Ncase M1
Hi All, I recently built my first OC hack on an Asus Strix z390 and 9900k which all went well... but then this week I was offered the chance to upgrade to a 10900k and z490 – I was a little apprehensive as I'm not that experienced, and wasn't sure I was ready to be an early adopter, but went ahead anyway!
This isn't a full guide, just a capture of the quirks I found when using this motherboard.
Some...
Read more
↧
January 20, 2021, 8:21 am
As Big Sur does not support RX 6900XT now, so the best solution is using RX 6900XT in bootcamp, and using MPX card in Big Sur.
↧
January 20, 2021, 8:23 am
Hello
I bought a X299 cascade lake MotherBoard : AsRock X299 Creator
CPU : i9 9820x
It boots windows 10 and so I tried to boot Catalina
In BIOS (update to the last version : 1.30)
1- I disable
VT-d
Security Device support
Secure Boot
Intel Platform Trust Technology
CMS
Fast boot
Thunderbolt
Aquantia
2 - Advanced/ACPI/RTC alarm power On .. is ... "By OS" ??
3 - I didn't find anything about MSR lock
I use the last version of clover
During the boot, I stuck on PCI configuration
With or...
Read more
↧
↧
January 20, 2021, 8:27 am
I was previously running Mojave, then Catalina on an Asus M32D (i7-7000 ,32G ram, RX-580, Samsung Evo) but always wanted to build myself something I could use to essentially combine my old Dell R710 with my Hackintosh so I could have everything "under one roof" if you will. I decided on the following hardware;
Motherboard: Asus ROG Strix Z490-E Gaming
CPU: Intel 10700K
PSU: Thermaltake - SMART 700W ATX 80 Plus Power Supply
RAM: CORSAIR Vengeance Pro 48GB (2 x 8GB, 2x32) DDR4 2400
GPU...
Read more
↧
January 20, 2021, 9:05 am
This is a place-holder for installing / running Big Sur on the HP EliteDesk 800 G4/G5 Mini PC. This thread is derived from the
original Catalina Guide and will gradually replace the...
Read more
↧
January 20, 2021, 9:08 am
Hi all...apologies in advance, I'm new to posting in the forum, but have been a follower for the last 5 years or so.
Long story short, I had to reinstall Mojave on my Hackintosh due to a hard drive failure. Got it reinstalled, but now I can't get Preview to load any files (it crashes). I know it probably has something to do with the external GPU I'm using (an AMD Radeon). Back when I first did this Hackintosh (in 2017), I had it working fine but I can't remember what kexts or configuration...
Read more
↧
