Quantcast
Channel: tonymacx86.com
Viewing all 427618 articles
Browse latest View live
↧

[help] Dell Optiplex 7060 w/Intel HD 630 graphics

January 31, 2019, 7:06 am
$
0
0
After some success installing high sierra on a Dell Optiplex 9020, I recently purchased what I hoped was a hackintosh-friendly prebuild, the Dell Optiplex 7060 SSF. Presently this is the most powerful Optiplex selling on Dell's website. But after a week of trial and error am having no luck completing the installation. Every config and combination of kexts leads to a kernal...

[help] Dell Optiplex 7060 w/Intel HD 630 graphics
↧
Search

Hello, whether it is possible to install Hackintosh on this hardware ?

January 31, 2019, 7:07 am
$
0
0
CPU - QuadCore Intel Core i7-2600K, 3500 МГц (35 х 100)
Motherboard - MSI P67A-GD65 (MS-7681)
Graphics card - MSI N550GTX-Ti (MS-V261)
↧
↧

[Guide] DELL Inspiron 7560 Mojave Installation

January 31, 2019, 7:07 am
$
0
0


Finally I got a time to try 'fresh' install on my laptop and it seems like everything works well.

Only few difference between High Sierra installation. So the general information like spec, note before install, etc, please follow my installation guide for High Sierra from here.

What works?
  • ...

[Guide] DELL Inspiron 7560 Mojave Installation
↧

Mojave installation issues

January 31, 2019, 7:11 am
$
0
0
Hi All

Hackintoshing is turning out to be a bit above my technical level...

My setup:

Gigabyte H370M-D3H Rev 1.0
Intel Core i5 8400
Bios F3
iGPU
16GB RAM

What's going on:

I can get to the "clover operating systems boot manager". I click on "boot macOS install from install macOS Mojave." screen does black and text starts showing up on the screen. eventually it reboots to the same screen "clover operating systems boot manager" and just keeps doing this.

What I did: built machine...

Mojave installation issues
↧

[Guide] HP Elite 8300 / HP 6300 Pro using Clover UEFI hotpatch

January 31, 2019, 7:12 am
$
0
0
Logo.jpg

​
Special Note:
Due to the fact that im a decently active member and help people on the Laptops forum, there's no counting how many times i was near to complete the guide and i ended up loosing my draft of this guide by helping others, it seriously takes time and effort as i like it to be as clean, well detailed & documented as possible but for this particular reason so i don't lose everything over again, i will...

[Guide] HP Elite 8300 / HP 6300 Pro using Clover UEFI hotpatch
↧
↧

MSI GS63VR 7RF Stealth Pro

January 31, 2019, 7:22 am
$
0
0
This is the first laptop i'm trying to hack, so i've been reading this guide carefully & got a couple of steps further after various attempts to create the ideal boot-usb stick. But currently i'm stuck on the following screen:

msigs63vr7rf-hackintosh-install-stuck.jpg


My Hardware:
MSI GS63VR 7RF Stealth Pro
cpu: Intel Core i7 7700HQ Kabylake
gfx: Intel HD630
gfx-dedicated: gtx 1060 6gb
Motherboard: MS-16K2 (intel hm170 chipset)
memory: 16Gb ddr4 (2x8Gb samsung)
Network: Killer e2500
Drives: - 256 NVME...

MSI GS63VR 7RF Stealth Pro
↧

[Guide] Lenovo V330-15IKB using Clover UEFI hotpatch

January 31, 2019, 7:26 am
$
0
0
Laptop.png
​


Overview
Welcome everyone to my Lenovo V330-15IKB macOS Mojave guide.
This guide does not use Unibeast nor Multibeast, but instead uses @RehabMan's Clover bootloader builds as that's the most stable and optimized version of Clover bootloader for Laptops. I'm also using the Clover UEFI hotpatching method as opposed to ACPI static patching method. This method is the future of hackintoshing and it is a more...

[Guide] Lenovo V330-15IKB using Clover UEFI hotpatch
↧

Computer keeps resetting after installing Clover 4862

January 31, 2019, 7:33 am
$
0
0
Hi, so I wanted to prepare my computer for an upgrade from High Sierra 10.13.4 to Mojave. I ran a time machine backup, and then I wanted to make sure everything else was up to date before I did the os update. I updated the fake smc kext, the USB inject all Kext, and upgraded my clover boot manager to 4862. I reset the computer, and it got to the clover bootloader page, and I can see that part worked. it counted down to the boot of macOS, and after the countdown it reset the computer and went...

Computer keeps resetting after installing Clover 4862
↧
Search

[SUCCESS] - Sierra 10.12.5 - GA-X79-UP4 - NVIDIA GeForce GTX760 4GB

January 31, 2019, 7:34 am
$
0
0
Hello everybody,

finally after trying to install Sierra 10.12.15 with lots of pain for few days, I ended up with a fully working hackintosh.

I'm not posting all the guide because I've been following the ones already posted on this website (so if you do the same it should be fine) but I want to share my settings in case someone has the same build and is struggling to find the correct settings for the system.
I had lots of problem with my graphic card (had only one resolution and it was...

[SUCCESS] - Sierra 10.12.5 - GA-X79-UP4 - NVIDIA GeForce GTX760 4GB
↧
↧

"csrutil enable" Doesn't work - Can't enable SIP.

January 31, 2019, 7:38 am
$
0
0
I checked my System Preferences > Security & Privacy and got this:
1548920379922.png

But for whatever reason I wasn't prompted to "allow" when installing 3rd party kexts. So I ran this command:
Code: 
csrutil status
and got this response:
Code: 
System Integrity Protection status: disabled.
I rebooted into recovery, opened up the terminal and executed the same command, but to my surprise the I got the same response after rebooting into macOS.
Code: 
System Integrity...
"csrutil enable" Doesn't work - Can't enable SIP.
↧

Security Update 2019-001 10.13.6

January 31, 2019, 7:39 am
↧

Installing and Post Installing problems on Lenovo Legion y530

January 31, 2019, 7:48 am
$
0
0
Hi, im trying to install High sierra. Everything was just fine until a reach to the installer. I follow the Clover Laptop Guide and fix dual GPU problems patching the DSDT and SDST. The problem with the installer is that reboots and can't finish. I don't have Kernel panics or problems on verbosa.

I attached my config.plist and my DSDT and SDST that i patched. the status bar and the latest lines of verbosa.

i hope that somebody can help me with this.
↧

photos.app Stuck

January 31, 2019, 7:52 am
$
0
0
macOS：10.13.6 (17G5019)
Question:
Open photos. app system is very jammed, and then jammed, must power off and restart, but after entering the system, the problem still exists, do not know what the problem is, please know how to solve this problem, thank you very much.
↧
↧

iMac Pro X99 - Live the Future now with macOS 10.14 Mojave [Successful Build/Extended Guide]

January 31, 2019, 7:59 am
↧

How to build your own iMac Pro [Successful Build/Extended Guide]

January 31, 2019, 8:00 am
$
0
0
cover-nice-small.png


Successfully running my iMac Pro Skylake-X/X299 Build with macOS High Sierra 10.13.6 SU (17G4015)!

X299-10.13.6-SU.png


Abstract and Introduction:

This originating post constitutes a new macOS 10.13 High Sierra Desktop Guide for Skylake-X/X299, which certainly can still grow and improve by your estimated user feedback. This Skylake-X/X299 10.13 High Sierra Desktop Guide bases on the ASUS Prime X299 Deluxe. However, also other X299 ASUS...

How to build your own iMac Pro [Successful Build/Extended Guide]
↧
Search

[SUCCESS] Hackintosh will not boot with iGPU & Vega 64 GPU (running together) with Thunderbolt 3

January 31, 2019, 8:00 am
$
0
0
Thanks to the generous help of @jaymonkey and @pastrychef, I recently was able to successfully get my Z270 system (Asus ROG Maximus IX Hero with i7-7700k) running with both a Vega 64 GPU and the iGPU-Intel HD630 (headless) running together (like a real Mac)! See thread here:
https://www.tonymacx86.com/threads/...n-vega-64-nitro-in-macos-mojave-10-14.262778/

Then, I tried to add in Thunderbolt 3 support and...

[SUCCESS] Hackintosh will not boot with iGPU & Vega 64 GPU (running together) with Thunderbolt 3
↧

Using a Presonus Quantum Thunderbolt 2 Audio Interface...HELP

January 31, 2019, 8:03 am
$
0
0
I have successfully gotten my Hackintosh up and running... I have a Focusrite Claret 8pre Thunderbot ONE interface that works on my Sierra installation AND when I boot into windows... HOWEVER, I also have a Presonus Quantum Thunderbolt 2 interface that I can only get to work in Windows... I installed the Presonus drivers in both windows and Mac, but I just cannot get the Sierra side of things to "see" the Quantum interface. As I said, it works find in Windows from dual boot, and the...

Using a Presonus Quantum Thunderbolt 2 Audio Interface...HELP
↧
↧

Install Dell DW1820A (Broadcom BCM94350ZAE) Wireless AC/Bluetooth 4.1 PCIE In Mojave (Successfull) ***Almost STABLE Currently Testing New Methods***

January 31, 2019, 8:10 am
$
0
0
***Credit goes to Rehabman for his Broadcom bluetooth files which make up two of the kexts I've included for this to work.. The IO80211 kext is from macOS Yosemite so credit goes to Apple I guess. And whomever made the Kext Helper app I've included gets the credit for that one***

OK I managed to get it running at damn near useable quality. I haven experienced a panic/restart that's been associated with this cards drivers in far longer than the normal amount of...

Install Dell DW1820A (Broadcom BCM94350ZAE) Wireless AC/Bluetooth 4.1 PCIE In Mojave (Successfull) ***Almost STABLE Currently Testing New Methods***
↧

[Guide] HackrNVMeFamily co-existence with IONVMeFamily using class-code spoof

January 31, 2019, 8:13 am
$
0
0
Overview

The purpose of this guide is to explain how to use the class-code spoof technique to keep un-patched IONVMeFamily.kext (incompatible with most PC NVMe SSDs) from loading such that HackrNVMeFamily can be used along side it in EFI/Clover/kexts or installed to the system volume (/Library/Extensions, /System/Library/Extensions).

I first published the technique on insanelymac...

[Guide] HackrNVMeFamily co-existence with IONVMeFamily using class-code spoof
↧

Stuck at "Copyrigh" in verbose mode during Mojave boot on HP Spectre X360 (Early 2017)(Verbose Attached)

January 31, 2019, 8:22 am
$
0
0
During mojave boot in verbose mode via Clover 4674 from USB the screen got stuck at a peculiar line, what can I do? I tried rebooting and starting in safe mode with verbose but nothing much different happened. It got stuck again.

Any idea of which the problem might be? (Verbose Screen attached in file)

Additional Info:
The USB was built with Unibeast 9 on Mac OS X Sierra Virtual Machine on Virtualbox and I didn't inject either ATI nor NVIDIA graphics. The laptop is HP Spectre X360...

Stuck at "Copyrigh" in verbose mode during Mojave boot on HP Spectre X360 (Early 2017)(Verbose Attached)
↧
Viewing all 427618 articles
Browse latest View live
Search