Correct Patches, Kexts and Settings for UHD display and HD 620

September 4, 2018, 7:25 am

≫ Next: Wake from sleep Issue / Arrandale + HM55

≪ Previous: Mini Itx Build + Wacom Cintiq 22 (DVI)

$

0

0

Hi,

I currently have a fresh install of 10.13.6 which follows Rehab Man's guide. I have tried various kexts and patches to no success. I have since reinstalled to a clean install.

Some specs:
Lenovo T570 4k Screen with 940MX (I know the 940mx cannot be used)
128mb video memory (set via bios)
Intel 7600U with HD 620 graphics

I am not too sure what to do, I have used Rehab Man's Y50 (I think that laptop) patches which worked but gave very sluggish performance and required the b to be...

Correct Patches, Kexts and Settings for UHD display and HD 620

---

Wake from sleep Issue / Arrandale + HM55

September 4, 2018, 7:28 am

≫ Next: Attempting System Restart... (Pentium G5400)

≪ Previous: Correct Patches, Kexts and Settings for UHD display and HD 620

$

0

0

Hi, everyone.

My PC doesn't wake from sleep.
I found some errors in compiling SSDT-0.aml , but couldn't correct it.
Help me, please...

My PC has a mobile CPU(i5 560M) and chipset(HM55), but itx board.
Should I go to Desktop category of this forum?

I'm not good at English, sorry.

Attempting System Restart... (Pentium G5400)

September 4, 2018, 7:51 am

≫ Next: [Help] HDMI output is unstable at 1440p resolution

≪ Previous: Wake from sleep Issue / Arrandale + HM55

$

0

0

Hey guys, this is my first Hackintosh attempt, trying this on my new PC. The specifications are below.

Mobo: Asus Prime H310M-D
Processor: Intel Pentium G5400
GPU: Gigabyte GTX 750 1GB
RAM: Kingston HyperX Fury DDR4 2400 mHz
SSD: 120GB SanDisk SATA, 240GB Toshiba NVMe (will install on this)

I found a guide on installing Hackintosh on a Kaby Lake Pentium processor, applied it to my Coffee Lake one. I'm including the preboot.log and config.plist files.

Please help this fellow nerd.

[Help] HDMI output is unstable at 1440p resolution

September 4, 2018, 7:54 am

≫ Next: [Guide] Native Intel UHD630 Graphics support in macOS 10.13.6

≪ Previous: Attempting System Restart... (Pentium G5400)

$

0

0

My laptop is Dell 5577.
CPU:i5-7300HQ
GPU:Intel HD630 (The NV GTX1050 is disabled)
macOS version: 10.13.5
This laptop have only one hdmi 1.4 port for video outputs.
the monitor is Dell U2518D which supports up to 2560*1440@60Hz (HDMI 2.0).

The image is stable in both Windows 10 and Ubuntu at 1440p resolution.

In macOS, it works perfectly at 1080p@60Hz.(No Audio, which i do not necessarily need)

It seems that macOS does not support 2560*1440 when using HDMI...

[Help] HDMI output is unstable at 1440p resolution

[Guide] Native Intel UHD630 Graphics support in macOS 10.13.6

September 4, 2018, 7:56 am

≫ Next: PROBLEMS WITH iGPU UHD 630 7mb only. HEEELP! Legion y530

≪ Previous: [Help] HDMI output is unstable at 1440p resolution

$

0

0

So the new 2018 MacBook Pros are finally here, and they use the new 8th Gen CPUs & Graphics!

Installing the Updated OS
After Apple has released Supplemental Updates to macOS 10.13.6 for the new MacBook Pros, we can just use them to install the updated version of 10.13.6 with CFL support.
As the installers are only compatible with 10.13.6, you'll first need to update to the 'official' version through the Mac App Store.
After the update is complete, you can download the Supplemental...

[Guide] Native Intel UHD630 Graphics support in macOS 10.13.6

PROBLEMS WITH iGPU UHD 630 7mb only. HEEELP! Legion y530

September 4, 2018, 7:57 am

≫ Next: High Sierra First Boot stuck at Ethernet [IntelMausi]

≪ Previous: [Guide] Native Intel UHD630 Graphics support in macOS 10.13.6

$

0

0

Hi, I have succesful installation but the problems s that after fix ethernet, keyboard, sleep, camera, etc I couldn't fix graphics and I am a little stuck. I attache my Problem reporting file so you can help me please.

I follow the REHAB MAN's guide Install HS with clover on laptop and I use the config.plist config_HD615_620_630_640_650 from the raw recipe of REHAB MAN

all the links and previews steps can find here:...

PROBLEMS WITH iGPU UHD 630 7mb only. HEEELP! Legion y530

High Sierra First Boot stuck at Ethernet [IntelMausi]

September 4, 2018, 7:57 am

≫ Next: [Guide] Dell Inspiron 15 7559 Sierra/High Sierra Install

≪ Previous: PROBLEMS WITH iGPU UHD 630 7mb only. HEEELP! Legion y530

$

0

0

Hello! This is my first time posting here and I seek help to install High Sierra.
I have followed the guide made by Stork on https://www.tonymacx86.com/threads/...og-maximus-viii-hero-i7-6700k-gtx-980.250824/, because my motherboard is the one above, tough my GPU is the nVidia GTX 1070.
However, I am unable to install High Sierra because I’m stuck at stop sign or when I get to verbose mode, the last thing shown to me is Ethernet...

High Sierra First Boot stuck at Ethernet [IntelMausi]

[Guide] Dell Inspiron 15 7559 Sierra/High Sierra Install

September 4, 2018, 7:57 am

≫ Next: GA-Z370M-DS3H Realtek887 no sound via HDMI (Intel UHD 630)

≪ Previous: High Sierra First Boot stuck at Ethernet [IntelMausi]

$

0

0

High Sierra:
The nvidia chip needs to be disabled by patching your DSDT, instructions are now in the ACPI part of the guide. If upgrading to high Sierra read https://www.tonymacx86.com/threads/...gh-sierra-install.201576/page-87#post-1605581 For a clean install, the High Sierra installer needs to have a method to disable nvidia to boot.

Not yet working:
- Stock Wi-fi

Prerequisites:

BCM94352Z NGFF WiFi card for wifi. (Clover...

[Guide] Dell Inspiron 15 7559 Sierra/High Sierra Install

---

GA-Z370M-DS3H Realtek887 no sound via HDMI (Intel UHD 630)

September 4, 2018, 7:58 am

≫ Next: OSX Sierra won't load after GPU crash

≪ Previous: [Guide] Dell Inspiron 15 7559 Sierra/High Sierra Install

$

0

0

Hello!
I installed Hackintosh HighSierra 10.13.6 through UniBeast 8.3.2 and MultiBeast 10.4.0. My onboard SoundCard is Realtek877. My Monitor - TV4k via HDMI. I can not get sound through TV HDMI.
I've tried these MultiBeast settings:
Driver ALC887 / 888 = No HDMI port and no rear green sound.
Driver ALC887 / 888 + optional HD3000 / 4000 hdmi audio = Yes greenports audio, Yes HDMI port but no HDMI sound.
Universal VoodooHDA2.9 (appleHDA kext deleted) = Yes greenports audio, Yes HDMI port but...

GA-Z370M-DS3H Realtek887 no sound via HDMI (Intel UHD 630)

OSX Sierra won't load after GPU crash

September 4, 2018, 7:58 am

≫ Next: Almost fully functional Acer Nitro 5!

≪ Previous: GA-Z370M-DS3H Realtek887 no sound via HDMI (Intel UHD 630)

$

0

0

Hello,

my GPU died yesterday (snif).
I plugged my monitor on my motherboard and tried to launch Sierra.
I got to clover, then boot as usual. I see the black screen with the apple, the loading bar goes up to the end (quite slowly though) but when it gets to the end, the computer restarts...

So I was wondering if Sierra was looking for a GPU that isn't there anymore, and if this is the reason why it cannot load.

Any advice on what I should do ?


config :
Gigabyte GA-Z270N-WIFI
Intel i7700k...

OSX Sierra won't load after GPU crash

Almost fully functional Acer Nitro 5!

September 4, 2018, 8:00 am

≫ Next: HDMI Audio not working on GTX 1060 6B

≪ Previous: OSX Sierra won't load after GPU crash

$

0

0

Hey everyone,
I have purchased a new laptop that is more modern than the Elitebook 8770w I was using prior. I now have an Acer Nitro 5 Gaming laptop that I plan on dual booting Windows 10 and macOS 10.14. As the title shows, I almost have everything working on this system. Let me attach my hardware specs and what is/isn't working :

Intel Core i5-7300HQ (2.5Ghz-3.5Ghz)
Intel HM175 Chipset
Intel HD 630 Graphics and nVidia Geforce GTX 1050 Ti w/ 4GB GDDR5 VRAM
Crucial Ballistix Sport 32GB DDR4...

Almost fully functional Acer Nitro 5!

HDMI Audio not working on GTX 1060 6B

September 4, 2018, 8:00 am

≫ Next: Gigabyte AORUS Gaming 5 - USB 3.1 gen 1 not working HIGH SIERRA

≪ Previous: Almost fully functional Acer Nitro 5!

$

0

0

Hi everybody, I'm here cause I'm trying to make my HDMI audio work on my GTX 1060 (6GB). I tried with VooDooHDA (downloaded an installer and ran it) and it didn't work. Also when I go in sound options I can't see any input or output devices listed. How can I fix this?

Thanks in advance!

Gigabyte AORUS Gaming 5 - USB 3.1 gen 1 not working HIGH SIERRA

September 4, 2018, 8:00 am

≫ Next: Multibeast for Mojave?

≪ Previous: HDMI Audio not working on GTX 1060 6B

$

0

0

Hi all,

Been a while since I posted. I hope you're all well!

So I've built a hack with the following components:

Gigabyte AORUS Gaming 5
i7-8700
EVGA GTX 1050 SCC
32GB DDR4-3000 (Team Delta RGB)
Corsair RM650x PSU

So far I've gotten everything to work using Multibeast and Clover Configurator except for the on-board WIFI (I know this doesn't work at all) and the USB 3.0 controller. I think it's an ASMedia 3142. USB 2.0 drives work in all ports, USB 3.0 drives work in the rear 3.1 gen 2...

Gigabyte AORUS Gaming 5 - USB 3.1 gen 1 not working HIGH SIERRA

Multibeast for Mojave?

September 4, 2018, 8:01 am

≫ Next: [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

≪ Previous: Gigabyte AORUS Gaming 5 - USB 3.1 gen 1 not working HIGH SIERRA

$

0

0

Hello folks, when we have a Multibeast for Mojave? I tried the last Mojave Beta in my desk (i7 4790k, GTX 970, Z97x Gaming 3 with ALC1150) but no success. Not recognize audio, not rec. GTX 970 and the kexts for HS 10.13.6 not run in Mojave.

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

September 4, 2018, 8:03 am

≫ Next: [Guide] Lenovo Legion Y520/Y720 using Clover UEFI

≪ Previous: Multibeast for Mojave?

$

0

0

Overview

The purpose of this guide is to provide a step-by-step guide to installing High Sierra, Sierra, El Capitan, or Yosemite on the ProBook/EliteBook/Zbook equipped with Intel graphics.

Note: For Broadwell and Skylake hardware, you must install at least 10.11. Broadwell support in 10.10 is not stable (previous versions no Broadwell support). And Skylake support was only introduced in 10.11 (.?), and only stable enough for use in 10.11.4 or later.

Note: This guide will also...

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

---

[Guide] Lenovo Legion Y520/Y720 using Clover UEFI

September 4, 2018, 8:04 am

≫ Next: High Sierra 10.13.6 Update Doesn't Complete

≪ Previous: [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

$

0

0

Overview

The purpose of this guide is to provide a step-by-step guide to installing High Sierra or Sierra (10.12.6 only) on the Legion Y520/Y720 laptops.

My machine is a Y520 with Broadcom BCM94352Z.

Note: Unlike most Lenovo laptops this laptop doesn't have a WiFi whitelist.

Note: This guide will probably work with the Y920 too.


What you need

- macOS High Sierra, or Sierra downloaded from the Mac App Store.
- 8GB USB stick.


BIOS settings

Insure that:
- UEFI...

[Guide] Lenovo Legion Y520/Y720 using Clover UEFI

High Sierra 10.13.6 Update Doesn't Complete

September 4, 2018, 8:24 am

≫ Next: Wakes up after sleep high Sierra Wake Reason: XDCI XHC

≪ Previous: [Guide] Lenovo Legion Y520/Y720 using Clover UEFI

$

0

0

Hello All, I could use some help. I've gone through this entire thread but so far no luck. I updated Clover to the latest build made sure to have the new .efi (ApfsDriverLoader-64.efi,AptioMemoryFix-64.efi) installed although I still have AptioMemoryfix.efi and EmuvariableUefi-64.efi in the Drivers64Uefi folder. I have tried updating with both the regular and combo update, and, in both cases, what happen is the computer restarts; I get the Apple logo over black screen with progress bar and...

High Sierra 10.13.6 Update Doesn't Complete

Wakes up after sleep high Sierra Wake Reason: XDCI XHC

September 4, 2018, 8:26 am

≫ Next: [solved] DELL Inspiron 7472, i5-8250U Coffee Lake Sierra

≪ Previous: High Sierra 10.13.6 Update Doesn't Complete

$

0

0

My 10.13.4 system will wake up right after sleep.

Darkwake=No Dart=0 (tried multiple settings)

log show --style syslog | fgrep "Wake reason" tells me:

(AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XDCI XHC

wimessers$ pmset -g assertions tells me:

Assertion status system-wide:

BackgroundTask 0

ApplePushServiceTask 0

UserIsActive 1

PreventUserIdleDisplaySleep 0

PreventSystemSleep 0...

Wakes up after sleep high Sierra Wake Reason: XDCI XHC

[solved] DELL Inspiron 7472, i5-8250U Coffee Lake Sierra

September 4, 2018, 8:29 am

≫ Next: i3 8100 | B360 Motherboard - No iGPU acceleration

≪ Previous: Wakes up after sleep high Sierra Wake Reason: XDCI XHC

$

0

0

High Sierra Working Fully
DELL Inspiron 7472, i5-8250U,
Intel UHD 620+Nvidia MX150(Optimus & disabled),
8GB DDR4,1TB Sata HDD+128gb hynix M.2(NonT NVME),Audio Realtek ALC3246,Qualcomm QCA61x4A 802.11ac Wireless Adapter

attached EFI folder+config_HIGH_SEIRRA_TESTING.plist that works for me in high...

[solved] DELL Inspiron 7472, i5-8250U Coffee Lake Sierra

i3 8100 | B360 Motherboard - No iGPU acceleration

September 4, 2018, 8:35 am

≫ Next: Strange graphics/sound behavior (only with SSD)

≪ Previous: [solved] DELL Inspiron 7472, i5-8250U Coffee Lake Sierra

$

0

0

My hardware:
Motherboard: GIGABYTE B360M DS3H
CPU: i3 8100
GPU: Intel UHD Graphics 630
RAM: 2x8 ddr4
Storage: 512GB SSD (I'm using APFS) + 1TB HDD
NetworkCard (WiFi+BT): BCM94360CD

Problem:
I've installed High Sierra 10.13.4 with last updates. Tried adding 0x3E918086 0x3E928086 to AppleIntelKBLGraphicsFramebuffer.kext and AppleIntelKBLGraphics.kext then adding 0x3E928086 to IntelGFX...

i3 8100 | B360 Motherboard - No iGPU acceleration