Quantcast
Channel: tonymacx86.com
Viewing all 427618 articles
Browse latest View live
↧

[Guide] Dell Inspiron 15 7559 Sierra/High Sierra/MOJAVE Install

January 31, 2019, 2:54 am
$
0
0
Mojave:
- Updated the kexts, now using whatevergreen, applealc, and VerbStub.
- Added sdcard kext.

Not yet working:
- Stock Wi-fi

Prerequisites:

BCM94352Z NGFF WiFi card for wifi. (Clover config includes a patch)

Most recent BIOS 1.2.2 is compatible. BIOS Settings need to be as follows:

- Restore BIOS defaults
- AHCI mode should be selected under SATA
- Disable VT for direct I/O
- Advanced Battery Charging should be disabled
- Secure boot should be disabled
- turn...

[Guide] Dell Inspiron 15 7559 Sierra/High Sierra/MOJAVE Install
↧
Search

How to set ig-platform-id?

January 31, 2019, 3:00 am
$
0
0
Probably a dumb question, but I searched the entire site and haven't found an answer yet.
The story goes like this: I have installed Mojave using Clover UEFI. Everything works fine except FCPX render (green artifacts issue). If I disable the iGPU FCPX works fine too, I get 35sec in Bruce X. But everybody says that the iGPU should be enabled in order to unlock full FCPX potential. So I searched and found Pastrychef's recommendation for a similar build: set ig-platform-id=04120004. This has...

How to set ig-platform-id?
↧
↧

How to build your own iMac Pro [Successful Build/Extended Guide]

January 31, 2019, 3:10 am
$
0
0
cover-nice-small.png


Successfully running my iMac Pro Skylake-X/X299 Build with macOS High Sierra 10.13.6 SU (17G4015)!

X299-10.13.6-SU.png


Abstract and Introduction:

This originating post constitutes a new macOS 10.13 High Sierra Desktop Guide for Skylake-X/X299, which certainly can still grow and improve by your estimated user feedback. This Skylake-X/X299 10.13 High Sierra Desktop Guide bases on the ASUS Prime X299 Deluxe. However, also other X299 ASUS...

How to build your own iMac Pro [Successful Build/Extended Guide]
↧

i9-9900k, Asus Maximus XI Hero, Rx580 8Gb Pulse, Random Freezes

January 31, 2019, 3:16 am
$
0
0
Hi everyone I built a new system 2 months ago mainly for video editing/photography work. This is my 4th hackintosh since 2013.
First of all system specs and bios settings:

Intel i9-9900k
Asus Maximus XI Hero Z390
G.Skill 16GB 3200mhz 16-18-18-38 RGB
Sapphire Rx580 8Gb PulseÂ
Samsung 970 EVO 500GbÂ
Samsung 850 EVO 250Gb
Dell U2413 1920x1200
Dell U2417h 1920x1080
Nzxt Kraken X62 AIO


BIOS Settings

VT-d - Disable
CFG-Lock - Disable
Secure Boot Mode - Disable
OS Type -...

i9-9900k, Asus Maximus XI Hero, Rx580 8Gb Pulse, Random Freezes
↧

Hackintosh Acer Aspire E5-573G

January 31, 2019, 3:18 am
$
0
0
Hi everyone!
[FIXED] I'm trying to install El Capitan on my new computer: Acer Aspire E5-573G-590R

Intel Core i5 (5th Gen) 5200U / 2.2 GHz (Turbo 2.7 GHz) Dual Core
NVIDIA GeForce 920M - 2 GB DDR3 VRAM (and integrated Intel Graphics)
RAM: 4GB
Bios is set to boot in UEFI

Can anyone help me? I'm getting this error:

Error allocating 0x10b21 pages at 0x000000000c890000 alloc type 2
Couldn't allocate runtime area
Boot failed, sleeping for 10 seconds...

Hackintosh Acer Aspire E5-573G
↧
↧

[Request for Information]ASUS Mini PC PN60-BB5012MD (90MR0011-M00120)

January 31, 2019, 3:28 am
↧

Gigabyte Z390 Aorus Pro Wifi, cannot get installer to boot

January 31, 2019, 3:30 am
$
0
0
OK, first off, since this is a potential system and not yet listed on my sig, here's the hardware I'm working with:
Mobo: Gigabyte z390 Aorus Pro Wifi (both original F5 BIOS and F6 latest BIOS gave same results)
CPU: i7 8700k
RAM: 32GB 2400 Crucial, 8GB/stick (tried with all slots populated and then just one, also tried moving the single stick to every slot, no change)
GPU: NVIDIA GT720 (also tried with the internal UHD630 when I removed all PC cards, still no change).

The problem? I can't...

Gigabyte Z390 Aorus Pro Wifi, cannot get installer to boot
↧

[GUIDE] General Framebuffer Patching Guide (HDMI Black Screen Problem)

January 31, 2019, 3:38 am
$
0
0
General Framebuffer Patching Guide using Hackintool

15 Jan 2019: Intel FB-Patcher has been renamed to Hackintool.
19 Jan 2019: Guide overhauled. Please be aware of possible HDMI hot-plug issues. After boot you may have to unplug and replug HDMI cable.

About this Guide
If you have a relatively recent motherboard with an Intel iGPU, and on-board HDMI is not working, here's a general guide...

[GUIDE] General Framebuffer Patching Guide (HDMI Black Screen Problem)
↧
Search

Black screen on boot with NVidia web drivers

January 31, 2019, 3:43 am
$
0
0
Hi, I've managed to install High Sierra on my computer, got everything working now apart from the display drivers. I am using an NVidia 750Ti, and have installed the relevant NVidia Web Drivers for my OS version (17G65 I believe), but when I boot with this driver injected, I get a black screen after the Apple loading splash.

Last night I installed Lilu.kext and WhateverGreen.kext, and managed to boot in with the NVidia Web Drivers, and everything was running smoothly, so I set some software...

Black screen on boot with NVidia web drivers
↧
↧

Kaby Lake i5-7500 + ASUS H110T+16GB+INTEL HD630

January 31, 2019, 3:46 am
↧

[Success] GIGABYTE Z370 Gaming 7 + Intel Core i7-8700K + RX 580 + (2x) Dell P2715Q 4k @ 60Hz

January 31, 2019, 3:48 am
↧

[Guide] Install High Sierra or Mojave on the Dell Optiplex 7010 / 9010 Desktop PC - Revision II

January 31, 2019, 3:50 am
$
0
0
Four Form Factors to Choose From

optiplex-desktop-7010-overview3.jpg

​
Comments
This guide for the Dell Optiplex 7010/9010 is a complete description of 7 steps necessary to get your system working with macOS High Sierra or Mojave. These business desktops are Ivy Bridge based and utilize the Q77 Express chipset. They have BIOS and UEFI which allows for either legacy or UEFI booting. UEFI is the preferred method and will be described here...

[Guide] Install High Sierra or Mojave on the Dell Optiplex 7010 / 9010 Desktop PC - Revision II
↧

[TOOL] [GENERATE PROPER PROBLEM REPORTING FILES]

January 31, 2019, 3:50 am
$
0
0
Last update: 04 Mar 2018
Current Version: 4.2

Hello guys,
I have seen many instances where people start a thread with the problem they are facing on their hack.

They try to describe the issue in their own way that most of the times, is not able to properly describe what's going wrong with their system.

The developers and other...

[TOOL] [GENERATE PROPER PROBLEM REPORTING FILES]
↧
↧

[Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI

January 31, 2019, 3:58 am
↧

[Guide] Booting the OS X installer on LAPTOPS with Clover

January 31, 2019, 3:59 am
$
0
0
Overview

One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are described. If you have a computer capable of booting UEFI, use the UEFI instructions. If your computer does not have UEFI there are not as many advantages to using Clover, although there are...

[Guide] Booting the OS X installer on LAPTOPS with Clover
↧
Search

[SUCCESS] Ongoing Status of Designare Z390 with i7-9700K

January 31, 2019, 4:02 am
$
0
0
UPDATE: The complete build guide has been posted here.

Overview
The Gigabyte Designare Z390 has attracted the attention of the Hackintosh community because of its built-in Titan Ridge Thunderbolt 3 controller. This is a full-featured ATX motherboard that also contains a Socket 1 NVMe card for WiFi/Bluetooth. Although the motherboard ships with...

[SUCCESS] Ongoing Status of Designare Z390 with i7-9700K
↧

Changing system Definitions

January 31, 2019, 4:04 am
$
0
0
Hi all,

I have just finished building my first Hackintosh. All seems stable. Ethernet, Graphics etc. However its being ID'ed as a IMac from 2013. I am using an old Intel Nuc DC3217 can I change this to a Mini mac or do I run the risk of messing things up, that did previously work fine?
↧
↧

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

January 31, 2019, 4:06 am
↧

Dell Xps 13 3970

January 31, 2019, 4:11 am
$
0
0
Hey, I just bought the 2018 dell XPS 13 9370 and I want to install mac OS on it, but I haven't found any information about the compatibility and the drivers on mac (the device is the developers edition). does anybody tried that any recommendations.
thanks in advance.
↧

My Hacktintosh Build on H370 Aorus Gaming 3 WiFi - rev1.0

January 31, 2019, 4:11 am
↧
Viewing all 427618 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>