[Release] Intel FB-Patcher v1.6.8

December 20, 2018, 8:12 am

≫ Next: [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

≪ Previous: AppleNVMe Assert failed / ASRock Z390, 9700k, 970Pro NVMe M.2

$

0

0

WARNING!
Intel FB-Patcher is not an automated patching tool that does all the work for you. Knowledge is required on how to patch before using it. Please read the Intel Framebuffer patching using WhateverGreen guide before you download this tool!

Mojave, Lilu + WhateverGreen
You cannot use the Clover's KextsToPatch for framebuffer patching in Mojave for Skylake and...

[Release] Intel FB-Patcher v1.6.8

---

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

December 20, 2018, 8:13 am

≫ Next: Getting Gigabyte Z390 to work with High Sierra

≪ Previous: [Release] Intel FB-Patcher v1.6.8

$

0

0

Overview

The purpose of this guide is to provide a step-by-step guide to installing Mojave, High Sierra, Sierra, El Capitan, or Yosemite on the ProBook/EliteBook/Zbook equipped with Intel graphics.

Note: For Broadwell and Skylake hardware, you must install at least 10.11. Broadwell support in 10.10 is not stable (previous versions no Broadwell support). And Skylake support was only introduced in 10.11 (.?), and only stable enough for use in 10.11.4 or later.

I have both a ProBook...

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Getting Gigabyte Z390 to work with High Sierra

December 20, 2018, 8:17 am

≫ Next: Installation Stalls

≪ Previous: [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

$

0

0

I have a 2011 macbook air with High Sierra installed. I'm trying to download a copy of high sierra to install only new PC. The installation instructions here say to just go the the app store and download it, but it does not appear anywhere in my app store. How can I get a full useable copy for unibeast?

UPDATE: I found out how to download High Sierra, but now it won't install on my Z390 board. The title has been changed to reflect the new issue.

Installation Stalls

December 20, 2018, 8:18 am

≫ Next: New Install - Prohibitory Sign

≪ Previous: Getting Gigabyte Z390 to work with High Sierra

$

0

0

After I select Boot OS X Install from Install macOS Mojave I see the Apple and the loader starts a tiny bit then gets stuck. I came back 1hr later and no improvement. Anyone else get this?

New Install - Prohibitory Sign

December 20, 2018, 8:20 am

≫ Next: Planing to build my first Hackintosh (need help for hardware)

≪ Previous: Installation Stalls

$

0

0

Hi there, New to hackintosh and having problems installing, getting the prohibitory sign - tried following almost every guide out there for this mother board but still nothing. Ill try to include as much info as I can but if you need anything else please let me know.


-Patriot Viper Elite 16GB (2 x 8GB) DDR4
-MSI Z270 GAMING PRO CARBON
-Crucial 1tb SSD
-AORUS GeForce® GTX 1080 Ti Xtreme Edition 11G
-EVGA 750
-CORSAIR H100i v2
-Intel 7th Gen Core i7-7700K

Images -...

New Install - Prohibitory Sign

Planing to build my first Hackintosh (need help for hardware)

December 20, 2018, 8:22 am

≫ Next: [Guide] Lenovo X250

≪ Previous: New Install - Prohibitory Sign

$

0

0

Hi guys,

I have been reading and researching for a couple weeks and decided to build my first Hackintosh computer. I'm not sure the list I came up with is good enough. Would you mind checking the compatibility of the following system with the latest Mac OS?

ASUS ROG MAXIMUS XI HERO (WI-FI) ATX LGA1151 Motherboard
Crucial Ballistix Sport LT 64 GB (4 x 16 GB) DDR4-2400 Memory

Intel i7-8700K Processor
NZXT Kraken X72 Liquid CPU Cooler

2x Samsung 970 EVO 1TB M.2-2280 SSDs
Seagate Barracuda...

Planing to build my first Hackintosh (need help for hardware)

[Guide] Lenovo X250

December 20, 2018, 8:36 am

≫ Next: [Success] Coffee Lake - Gigabyte Z370 HD3P - i5 8600K - MSI GeForce GTX 1080 DUKE | Mojave

≪ Previous: Planing to build my first Hackintosh (need help for hardware)

$

0

0

This guide details the installation of macOS Sierra/High Sierra carried out on a Lenovo X250 with the following hardware:
- Core i5-5300U
- Intel HD5500 (ig-platform-id 0x16260006)
- Audio ALC3232
- Wireless&bluetooth card Intel AC...replaced by a Broadcom 94352z first which has no driver for windows. Now using a dw1830 which has drivers for windows 10 if needed.

Will work:

• PowerManagement
• Sleep & Wake up
• Audio HDA + hdmi
• Mini-DVI output
• BT4 and...

[Guide] Lenovo X250

[Success] Coffee Lake - Gigabyte Z370 HD3P - i5 8600K - MSI GeForce GTX 1080 DUKE | Mojave

December 20, 2018, 8:43 am

≫ Next: Baffled: install fails at verifying installesd.dmg

≪ Previous: [Guide] Lenovo X250

$

0

0

monsterz Build:
Gigabyte Z370 HD3P - i5 8600K - MSI GTX 1080 DUKE

Components

Intel Core i5 8600K Processor(Overclocked to 4.8 GHz)
https://www.amazon.com/dp/B0759FKH8K/?tag=tonymacx86com-20

Gigabyte Z370 HD3P Motherboard
https://www.amazon.com/dp/B0762RN791/?tag=tonymacx86com-20

Crucial 16GB RAM...

[Success] Coffee Lake - Gigabyte Z370 HD3P - i5 8600K - MSI GeForce GTX 1080 DUKE | Mojave

---

Baffled: install fails at verifying installesd.dmg

December 20, 2018, 8:43 am

≫ Next: Yosemite High Sierra dual boot issue.

≪ Previous: [Success] Coffee Lake - Gigabyte Z370 HD3P - i5 8600K - MSI GeForce GTX 1080 DUKE | Mojave

$

0

0

bit of background: I put my hardware together and installed Mojave in the middle of November. I’ll it’s pretty much the same as this: https://www.tonymacx86.com/threads/...-8400-ga-z370n-wifi-i630-airport-card.258728/
...except using an Xfx graphics card. For a couple of weeks it was like a rock - stable, fast, everything I could ask for. Then I noticed a couple of kernel panics... I put it down to the software I was using and didn’t think much more about...

Baffled: install fails at verifying installesd.dmg

Yosemite High Sierra dual boot issue.

December 20, 2018, 8:46 am

≫ Next: [SUCCESS] Ongoing Status of Designare Z390 with i7-9700K

≪ Previous: Baffled: install fails at verifying installesd.dmg

$

0

0

Hi, i have Yosemite and High Sierra dual boot on separate hdd. If i boot on high Sierra everything is fine, but, if i boot Yosemite my High Sierra wont boot and return to Clover screen. I already reinstall many times and nothing change. Any ideas? Thanks

[SUCCESS] Ongoing Status of Designare Z390 with i7-9700K

December 20, 2018, 8:47 am

≫ Next: "FireWire GUID 0000000000000000 is invalid!" at boot

≪ Previous: Yosemite High Sierra dual boot issue.

$

0

0

Overview
The Gigabyte Designare Z390 has attracted the attention of the Hackintosh community because of its built-in Titan Ridge Thunderbolt 3 controller. This is a full-featured ATX motherboard that also contains a Socket 1 NVMe card for WiFi/Bluetooth. Although the motherboard ships with Intel's latest WiFi/Bluetooth card, MacOS only supports Broadcom devices at this time. The allure of the Socket 1 card, of course, is that new WiFi and Bluetooth versions in the future can be...

[SUCCESS] Ongoing Status of Designare Z390 with i7-9700K

"FireWire GUID 0000000000000000 is invalid!" at boot

December 20, 2018, 8:51 am

≫ Next: Black Screen after Clover update to v4798

≪ Previous: [SUCCESS] Ongoing Status of Designare Z390 with i7-9700K

$

0

0

I can't boot into the macOS installer thanks to this error, is there any fix for this? Maybe any way for disable the firewire in clover?

Black Screen after Clover update to v4798

December 20, 2018, 8:51 am

≫ Next: Disk drives have changed positions in Mac startup options

≪ Previous: "FireWire GUID 0000000000000000 is invalid!" at boot

$

0

0

Hi,

I just updated to the latest Clover version. After the update I get the black screen after the Apple logo, instead of the login screen. Going back to the previous version of Clover fixed the issue again.

Any ideas what is causing this and how to fix it?

Thanks,
David

Disk drives have changed positions in Mac startup options

December 20, 2018, 8:55 am

≫ Next: Final Cut Pro X FCPX Graphic Card performance

≪ Previous: Black Screen after Clover update to v4798

$

0

0

Hi guys, I have an odd issue that doesn't even affect my system negatively, but it bothers me. When I hold the option key upon booting my iMac, my Macintosh HD and Boot Camp partition are displayed in the wrong order. When I first got my iMac and installed Windows alongside macOS, the Boot Camp partition appears to the right of Macintosh HD in the startup options, now the Boot Camp partition appears to the left of Macintosh HD.

I have renamed BOOTCAMP to Windows 10, does that have anything...

Disk drives have changed positions in Mac startup options

Final Cut Pro X FCPX Graphic Card performance

December 20, 2018, 8:56 am

≫ Next: Computer shuts down randomly

≪ Previous: Disk drives have changed positions in Mac startup options

$

0

0

Here's a link to a benchmark many are using that will help in deciding what graphic card to buy for FCPX use:

http://www.fcp.co/forum/hardware/18250-brucex-try-this-new-final-cut-pro-x-benchmark
(When you run the benchmark, just output to standard ProRes. Most are having trouble exporting to H264)

I wish I had seen that thread before I purchased my card. I have an MSI GTX 650ti. Works flawlessly. I added a 2nd identical card (just dropped it in - no configuration...

Final Cut Pro X FCPX Graphic Card performance

---

Computer shuts down randomly

December 20, 2018, 8:58 am

≫ Next: [Guide] Dell Inspiron 3543

≪ Previous: Final Cut Pro X FCPX Graphic Card performance

$

0

0

I i have installes highsierra using unibeast (i think it had clover included) somehow i realised that when i make changes to the config.plist through cloverconfigurator they dont apply.

So i wasnt able to update to the newest verion of highsierra without sacrificing the usb3 support. So i went back to the previous version which is fine.

But the computer seems to randomly shut down on sleep.

Also i discovered a graphic glitch. Anyone any suggestions? Config plist is attached

[Guide] Dell Inspiron 3543

December 20, 2018, 8:59 am

≫ Next: New Mojave Build Stuck on Prohibited Sign

≪ Previous: Computer shuts down randomly

$

0

0

HARDWARE:
-CPU Intel Core i3-5005u @2.0Ghz
-GPU Intel 5500 Graphics, 1536MB
-RAM 4GB DDR3 1600Mhz
-HardDrive a 2.5in laptop hard drive 1tb
-Ethernet Realtek8100
-Wifi AR9820 (Just for Wifi and was a separate purchase)
-Keyboard and Trackpad Builtin
-Webcam Builtin
-Audio Used VoodooHDA
-Bluetooth does not work you can use a different wifi card if you like
-Disc Reader Builtin

PREINSTALL:
1) Download...

[Guide] Dell Inspiron 3543

New Mojave Build Stuck on Prohibited Sign

December 20, 2018, 9:01 am

≫ Next: Problem to install macos mojave on a new pc

≪ Previous: [Guide] Dell Inspiron 3543

$

0

0

Been on this for a week... scoured many similar threads in the forum and tried a bunch of things but nothing seems to work. Here is my exact build (every single component was picked from the Buyer's Guide section. I understand that there is no guarantee that my combination will work 100%)

Motherboard: ASUS Prime H370M-Plus/CSM LGA1151 (300 Series)
Memory: 2X (32GB)...

New Mojave Build Stuck on Prohibited Sign

Problem to install macos mojave on a new pc

December 20, 2018, 9:11 am

≫ Next: Reboot during installation! Help!

≪ Previous: New Mojave Build Stuck on Prohibited Sign

$

0

0

Hi i'm a new user on the forum and i have a problem when i'm going to install macos mojave on a new pc.
My configuration is:
- Asus Z390-A
- Intel i7-8700
- Nvidia GeForce GTX 1060 Founder Edition
- Samsung 970 EVO 500gb
- Ram Corsair Venegance 32gb
- Cooler master master liquid 120
- Corsair 750 W

I followed a guide in tonymacx86 to install:
https://www.tonymacx86.com/threads/...ojave-on-any-supported-intel-based-pc.259381/

But when the installation stops...

Problem to install macos mojave on a new pc

Reboot during installation! Help!

December 20, 2018, 9:12 am

≫ Next: H264, HEVC hardware and RX 580 vs Vega 56?

≪ Previous: Problem to install macos mojave on a new pc

$

0

0

It’s my first time to build a hackintosh. I am stuck with the installation.


My PC specs:
Intel Core i3 8100
Gigabytes B360N AORUS Gaming Wi-Fi
Kingston A400 SATA3 120GB

First, I updated the BIOS to the latest version and then changed the BIOS setting based on the installation guide. I passed the Apple logo and entered macOS Utilities. Next, I formatted the SSD to Mac OS Extended (Journaled) with the Disk Utility and then clicked install macOS. It went well until it suddenly shut down at...

Reboot during installation! Help!